- Products
- Workshop equipment and tools
- Pumps
- Chemical pumps
- FLUIMAC Mag drive centrifugal pumps
FLUIMAC Mag drive centrifugal pumps
Product also in categories: Water pumps - electric
The models in our range are also suitable for corrosive media, with a PVDF pump body and seal options of either Viton or EPDM. The pump design has no shaft seal at all, so maintenance is reduced and reliability improved. The pump can handle only liquid, so particles must not enter the pump.
- Maximum outlet pressure is 2.5 bar
- Maximum viscosity 200 CPS / mPas,
- Liquid temperature -5 °C - + 90 °C.
- The pump is not self-priming; install the pump below the liquid level.
| Code | Suction conn. (sk) | Pressure port | Power (kw) | Seal material | Flow rate (l/min) | Package size (KPL) |
|---|---|---|---|---|---|---|
| 70-FMCM04-KD-012-3 | 1" | 1/2" | 0,12 | EPDM | 58 | 1 |
| 70-FMCM04-KV-012-3 | 1" | 1/2" | 0,12 | VITON | 58 | 1 |
| 70-FMCM06-KD-025-3 | 1" | 3/4" | 0,25 | EPDM | 116 | 1 |
| 70-FMCM06-KV-025-3 | 1" | 3/4" | 0,25 | VITON | 116 | 1 |
| 70-FMCM10-KD-055-3 | 1 1/2" | 1" | 0,55 | EPDM | 216 | 1 |
| 70-FMCM10-KV-055-3 | 1 1/2" | 1" | 0,55 | VITON | 216 | 1 |