- Products
- Pneumatics
- Connectors and pipes
- Compressed air brake fittings
- Inspection connector
Inspection connector
Test point (pressure test connection) for compressed air brake systems in trucks and trailers, ISO 3583. A pressure gauge connects to the M16x1.5 measuring thread without depressurising the system.
The test point is installed permanently at a measuring point of the compressed air system, for example on an air reservoir, a valve port, or before and after the load-sensing brake valve. Its internal valve opens only when a test hose or pressure gauge is screwed on, and closes when it is removed.
- Brake pressure measurements during service and inspection
- Adjusting the load-sensing brake valve
- Air suspension pressure checks and troubleshooting
The measuring thread is M16x1.5 on all sizes. Choose the male thread to match the component port: M12x1.5, M16x1.5 or M22x1.5.
| Code | Thread | Meas. thread | Package size (KPL) |
|---|---|---|---|
| J7774 | M12x1,5 | M16x1,5 | 1 |
| J7776 | M16x1,5 | M16x1,5 | 1 |
| J7777 | M22x1,5 | M16x1,5 | 1 |
Related products
