Power Units 3kW
Ready-made compact power units designed as a base for various hydraulic systems. The unit is supplied as standard painted and equipped with a return filter, sight glass, filler cap and main pressure relief valve. From the pressure relief valve, the pressure and tank lines can be taken directly, or a separate base plate for NG06 (Cetop3) size valves can be installed on top.
The power units are always assembled separately to order, and if required, customized and documented at an additional cost according to the customer's requirements.
- electric motor 3,0kW 400V 4-pole (~1450rpm) 3-phase motor
- painted oil tank
- pressure gauge with shut-off cock
- customer-specific customized valve manifold, or standard NK-EM223 base plate with threaded ports (G1/2”) and a pressure relief valve selected according to the system's theoretical maximum pressure
- return filter
- filler cap
- sight glass
- drain port plugged
- check valve in the pressure line
Electrical motor connection and system adjustment always by the customer.
| Code | Pump size (cm3/r) | Maximum pressure (bar) | Flow rate (l/min) | Oil tank volume (l) | Package size (KPL) |
|---|---|---|---|---|---|
| KON-030-045-030T | 4,5 | 250 | 6,5 | 30 | 1 |
| KON-030-063-030T | 6,3 | 200 | 9 | 30 | 1 |
| KON-030-082-030T | 8,2 | 150 | 12 | 30 | 1 |
| KON-030-082-055T | 8,2 | 150 | 12 | 55 | 1 |
| KON-030-100-030T | 10,0 | 120 | 15 | 30 | 1 |
| KON-030-100-055T | 10,0 | 120 | 15 | 55 | 1 |
