- Products
- Hydraulic components
- Motors and cylinders
- Hydraulic motors
- Gerotor motors
- EPMSYW - Hydraulic motor (OMSW) 1:10 with tapered shaft and hub mounting
EPMSYW - Hydraulic motor (OMSW) 1:10 with tapered shaft and hub mounting
Hub-mounted model with a tapered shaft, based on the EMPSY motor. This M+S Hydraulics gerotor motor can be used, for example, in brush equipment, small harvesters or as a drive motor. The hydraulic motor is interchangeable with Danfoss OMSW.
- K-shaft with 1:10 tapered shaft B6x6x20 DIN 6885
- hub mounting
- side ports G1/2"
- case drain line G1/4"
- disc valve motor
- M+S MSW series
- LL = Low leakage option
Code table and cross-references
| Code | M+S code | Sauer Danfoss code | Note |
|---|---|---|---|
| EPMSYW-200KLL | MSYW200KLL | - | |
| EPMSYW-250KLL | MSYW250KLL | - | |
| EPMSYW-315KLL | MSYW315KLL | 151F0513 | Danfoss equivalent same as EPMS |
| EPMSYW-400KLL | MSYW400KLL | - |
| Code | Displacement (cm3/r) | Maximum speed (r/min) continuous/instantaneous | Maximum continuous torque (daNm) cont./momentary/shock | Max. cont. op. press. = dP (bar) cont./inst./stroke | Package size (KPL) | 3D |
|---|---|---|---|---|---|---|
| EPMSYW-160KUSGLSVPC | 159,7 | 470/560 | 1 | |||
| EPMSYW-200KLL | 200 | 375/450 | 56,6/64,5/65 | 210/250/300 | 1 | |
| EPMSYW-200KUSGLSVPC | 200 | 375/450 | 56,6/64,5/65 | 210/250/300 | 1 | |
| EPMSYW-250KLL | 250 | 300/360 | 70,8/80,6/80,6 | 210/250/300 | 1 | |
| EPMSYW-315KLL | 314,9 | 240/285 | 90,0/96,0/108 | 210/250/300 | 1 | |
| EPMSYW-315KLLP | 314,9 | 240/285 | 90,0/96,0/108 | 210/250/300 | 1 | |
| EPMSYW-400KLL | 397 | 185/225 | 90,0/97,0/110 | 210/250/300 | 1 |