- Products
- Hydraulic components
- Motors and cylinders
- Hydraulic motors
- Gerotor motors
- EPMSYE - Reinforced orbital motor (OMS) with straight 32mm shaft and SAE A-4 4-bolt mount rear ports
EPMSYE - Reinforced orbital motor (OMS) with straight 32mm shaft and SAE A-4 4-bolt mount rear ports
Reinforced EPMS motor model with rear ports. The M+S gear motor can be used, for example, in brush cutters, small harvesters or as a drive motor. The hydraulic motor is interchangeable with Danfoss OMS.
- C shaft with 32mm cylindrical shaft and keyway
- 4-bolt SAE A-4 mounting
- rear ports G1/2", side ports plugged
- case drain G1/4"
- disc valve motor
- M+S MSYE series (rear-port version of the MSY motor)
- U in the code = 150 bar shaft seal
Code table and cross-references
| Code | M+S code |
|---|---|
| EPMSYE-200 | MSYE200C |
| EPMSYE-200CU | MSYE200CU |
| EPMSYE-250 | MSYE250C |
| EPMSYE-250CU | MSYE250CU |
| EPMSYE-315 | MSYE315C |
| EPMSYE-315CU | MSYE315CU |
| EPMSYE-400 | MSYE400C |
| EPMSYE-400CU | MSYE400CU |
| EPMSYE-475 | MSYE475C |
| EPMSYE-475CU | MSYE475CU |
| Code | Displacement (cm3/r) | Maximum speed (r/min) continuous/instantaneous | Maximum continuous torque (daNm) cont./momentary/shock | Max. cont. power (kW) cont./inst. | Max. cont. op. press. = dP (bar) cont./inst./stroke | Package size (KPL) | 3D |
|---|---|---|---|---|---|---|---|
| EPMSYE-200CU | 200 | 375/450 | 56,6/64,5/65 | 18,1/24 | 200/225/225 | 1 | |
| EPMSYE-250 | 250 | 300/360 | 70,8/80,6/80,6 | 18/23,8 | 200/225/225 | 1 | |
| EPMSYE-250CU | 250 | 300/360 | 70,8/80,6/80,6 | 18/23,8 | 200/225/225 | 1 | |
| EPMSYE-315 | 314,9 | 240/285 | 90/96/108 | 17/20,2 | 200/220/225 | 1 | |
| EPMSYE-315CU | 314,9 | 240/285 | 90/96/108 | 17/20,2 | 200/220/225 | 1 |
