BABSL - Pressure-resistant shaft seal NBR

Product also in categories: Seals and gaskets
BABSL - Pressure-resistant shaft seal NBR

Pressure-resistant radial shaft seal: rubber-covered outer diameter, steel insert, short and stiff spring-loaded sealing lip and a dust lip. The design withstands pressure difference, which makes the seal suitable for hydraulic pumps and motors. Material NBR. Sizes d x D x b for 12–130 mm shafts.

  • Dimensions: d = shaft diameter, D = housing bore diameter, b = seal width
  • The short, supported sealing lip withstands pressure difference: typically 5–10 bar at low circumferential speeds, the permissible pressure decreases as speed increases
  • The rubber-covered outer diameter seals well also in light-alloy housings
  • Material NBR (nitrile rubber), spring of spring steel; operating temperature approx. −40…+100 °C
  • Media: mineral-based hydraulic and gear oils and greases
  • Shaft: tolerance h11, hardness min. 55 HRC, surface roughness Ra 0.2–0.8 µm (plunge ground, no lead); housing bore: tolerance H8
  • Fitting: sealing lip and spring towards the pressure side; grease the space between the lips
  • Equivalent type designations include BABSL, TCV, TCN, ASP and WASY
  • Image for reference only
CodeInner diameter d (mm)Outer diameter D (mm)Width (mm)MaterialPackage size (KPL)
89-BABSL-12X22X612226NBR1
89-BABSL-14X24X714247NBR1
89-BABSL-17X28X617286NBR1
89-BABSL-17X30X717307NBR1
89-BABSL-17,46X28,58X6,3517,4628,586,35NBR1
89-BABSL-17,46X30,16X6,3517,4630,166,35NBR1
89-BABSL-18X30X718307NBR1
89-BABSL-18X32X618326NBR1
89-BABSL-19,05X31,75X6,3519,0531,756,35NBR1
89-BABSL-20X30X520305NBR1
89-BABSL-20X35X620356NBR1
89-BABSL-20X40X720407NBR1
89-BABSL-22X32X622326NBR1
89-BABSL-22X40X722407NBR1
89-BABSL-24X40X724407NBR1
89-BABSL-25X35X625356NBR1
89-BABSL-25X40X725407NBR1
89-BABSL-25X42X625426NBR1
89-BABSL-28X38X728387NBR1
89-BABSL-28X40X828408NBR1
89-BABSL-28,5X42X528,5425NBR1
89-BABSL-30X40X730407NBR1
89-BABSL-30X42X630426NBR1
89-BABSL-30X47X730477NBR1
89-BABSL-30X52X730527NBR1
89-BABSL-32X45X732457NBR1
89-BABSL-32X47X732477NBR1
89-BABSL-35X45X735457NBR1
89-BABSL-35X47X635476NBR1
89-BABSL-35X48X535485NBR1
89-BABSL-35X52X635526NBR1
89-BABSL-35X55X11355511NBR1
89-BABSL-35X62X735627NBR1
89-BABSL-36,51X50,8X7,9536,5150,87,95NBR1
89-BABSL-40X52X740527NBR1
89-BABSL-40X55X740557NBR1
89-BABSL-40X60X740607NBR1
89-BABSL-40X62X740627NBR1
89-BABSL-45X62X745627NBR1
89-BABSL-45X65X745657NBR1
89-BABSL-45X72X745727NBR1
89-BABSL-45X80X745807NBR1
89-BABSL-50X65X850658NBR1
89-BABSL-50X72X750727NBR1
89-BABSL-50X80X850808NBR1
89-BABSL-55X68X755687NBR1
89-BABSL-55X72X755727NBR1
89-BABSL-60X80X760807NBR1
89-BABSL-62X85X762857NBR1
89-BABSL-80X100X7801007NBR1
89-BABSL-85X120X7,5851207,5NBR1
89-BABSL-130X160X1213016012NBR1