A hydraulic pump.
Electrically controlled.
Thought through in advance.

Pump, IQAN control, sensors, cabling and software as one pre-matched system.

  • No mechanical LS line
  • Pre-configured IQAN control
  • Field-tested in heavy use

We help you choose the right pump size and dimension the system for your application.

In field test: timber crane with the VP1-e packageParkerVP1-e • Plug & Play

Faster to install

Less matching work during installation and commissioning.

Software and control are delivered pre-configured.

Less hydraulics

One hydraulic line less to build and to leak.

Electric pressure control removes the mechanical LS line.

Easier to maintain

Troubleshooting and tuning without opening the system.

Parameters, fault codes and diagnostics wirelessly (IQAN G12).

One delivery

Every part from one pre-matched system.

Pump, control, sensors, cabling and installation supplies.

Built for mobile hydraulics

  • Timber cranes
  • Truck cranes
  • Hook-lift equipment
  • Refuse collection vehicles
  • Tipper equipment
  • Snow ploughs
  • Spreaders
  • Vacuum trucks

Tested in real work

6+kk

of continuous operational use on a timber truck

  • Precise electric control
  • Good controllability
  • Reliable in heavy use
Read the thesis (Theseus) ↗
Timber crane at work with the VP1-e package

Less matching work. Ready sooner.

Traditional project

Pump → LS solution → sensors → control → cabling → programming → commissioning

VP1-e Plug & Play

  1. 01Sized for the application
  2. 02Install
  3. 03Connect
  4. 04In use

Salhydro helps choose the pump size and pre-configures the control for your application before delivery.

One system. One delivery.

Everything ready before the first hose connection.

You know the technology. The integration comes from Salhydro.

  1. 01View product ›
    Parker VP1-e
    Electronically controlled axial piston pump
  2. 02View product ›
    IQAN MC41
    Pre-programmed control unit
  3. 03View product ›
    2 × pressure transmitter
    Closed-loop measurement (OMFB 7P)
  4. 04View product ›
    IQAN G12
    Bluetooth diagnostics and parameters
  5. 05View product ›
    Ready-made harness
    Deutsch DT connectors, oil and cold resistant
  6. 06
    Installation supplies
    Hoses, fittings, clamps and cable ties
45–130cm³/r
Pump sizes
350bar
Continuous pressure
3 000r/min
Max speed
27kg
Weight incl. control
We help you choose the right pump size and dimension the system for your application.

Parker VP1-e

An electronically controlled axial piston pump for demanding mobile hydraulics.

Parker VP1-e -pumppu
  • EPC pressure controlElectric control via current signal — no LS line
  • Compact and light27 kg incl. control
  • ISO 7653-1985Mounting flange straight to the PTO
  • DIN 5462 splined shaftAlso available with a through shaft

Calculation example

What does removing unnecessary pressure margin mean?

1. Choose a pump size

Displacement 95 cm³/rev → theoretical flow 95 l/min @ 1,000 rpm

2. Adjust the scenario

2,4kW
Waste power / machine
1 900kWh/v
Hydraulic energy
~550l/v
Diesel (assumed)
~1 020€/v
≈ €10 200 / 10 yrs

A calculation example: P = Q × Δp / 600; diesel estimate assumes 88% total efficiency and 0,255 l/kWh specific consumption. Actual savings depend on the system, usage, flows, pressures and control strategy — the benefit of electric control is realised when its possibilities are used in sizing and control logic. We do this together with Salhydro.

Technical data
Pump sizes45 / 60 / 75 / 95 / 110 / 130 (45–128 cm³/r)
Max continuous pressure350 bar (intermittent 400–420 bar)
Max speed3 000 r/min
ShaftDIN 5462
Mounting flangeISO 7653-1985
Weight incl. control27 kg

Request a quote

Let us size the VP1-e Plug & Play for your application

Tell us the vehicle, the power take-off and the flow you need, and Salhydro specialists will put the package together with all installation supplies.

We help you choose the right pump size and dimension the system for your application.